Labocult Laboratory Incubator

The current regulation for laboratory incubators states that culture mediums may no longer stay in contact with the housing of the incubator. The Labocult has got from the beginning a shelf, which prevents the direct contact between culture mediums and housing.

The Labocult heating oven features a digital control with timer shut-off function and easy-to-read LED display for simple temperature control. The display and control foil are washable, easy to use and include signal lamps for function and alarm in addition to the on/off switch. A new feature is the door with integrated viewing window and a button that can be reached from the outside to activate the interior lighting. This helpful function allows the inspection of the culture media without interrupting the incubation process. Temperatures ranging from +5 °C above room temperature to 70 °C can be set in precise increments of 0.1 °C. The housing of the Labocult is made of painted sheet steel, the interior is made of stainless chrome steel and has a usable depth of 20 cm, or 27 cm in the case of the Labocult XL. The digital control guarantees a short heating time and has an accuracy of ± 0.5 °C at a temperature of 37 °C.

Automatic temperature control!

The current regulation for laboratory incubators is stating that the breeding grounds may no longer be in direct contact with the bottom surface. This is ensured by the built-in shelves.

WEEE Registrierungs-Nr. des Herstellers: DE74434443

Technical data:

Voltage: 230 volts / 50 Hz

Power consumption: 300 watts max. / typically 80 watts

Temperature range: minimum 5 °C above room temperature up to 50 °C

Accuracy: ± 0.5 °C

Timer: 0 – 9999 minutes

Dimensions:

Labocult: Housing 300 x 330 x 330 mm / Chamber 230 x 200 x 200 mm

Labocult XL: Housing 400 x 400 x 390 mm / Chamber 300 x 320 x 270 mm

Weight:

Labocult: 9 kg

Labocult XL: 12 kg